GPS Devices
We are providing industries top-class hardware to satisfy your client's need to get accurate data and worth your investment. We are bonded with leading hardware manufacturers to serve better hardware at challenging costs.
Mail us to ask any question
[email protected]
Topfly TLP2-SFB
TLP2-SFB long life battery asset tracker:
-Real time and historical locations, frequent reporting, alerts and different intervals for moving/stop.
-Non-rechargeable Long Life battery (replaceable). 5 years battery life with 1 report per day
-IP67 waterproof, rugged construction. Designed for outdoor uses and rough environments. Been tested under 5m water pressure for 15hrs. -30°C to 60°C
-Magnet/screws mounting, easy installation
-Removal alert, when the device is pulled off from asset, it will send an alert to platform (not supported with magnets)
Topfly TLP1-SF
TLP1-SF – 4G solar-powered GPS tracking device is designed to track the location of assets/trailers/trucks with a big initial battery and solar powered. Its battery can obtain power from solar panels to avoid maintenance costs.
Topfly TLW2-12B
The trailer tracking market is estimated by trusted organisation that it’ll grow at 28.8% compound annual rate until 2024. There are huge opportunities there for everyone in the tracking industry to grasp. The key in trailer tracking is that trailers do not have consistent power source for telematics, so what’s the optimised solution for trailer tracking?
TOPFLYtech’s hardwired asset tracker TLW2-12B features a 9600mAh/3.6V rechargeable battery and a removable harness cable for recharging and I/Os. It can be wired and hidden on the trailers, powered when trailer is towed by truck, and operates on internal battery when trailers standing alone (power disconnected). The large battery can last for months without having to recharge. IP67 weatherproof put your mind at ease in any situation.
The market has shown increasing interest and demand on this model, not only because they can turn 50% of their hardware cost to be their profit, but also the TLW2-12B really gets the work done!
Topfly OBD TLD2-D
TLD2 series tracker is designed as a global multi-mode connectivity solution and purpose-built to provide reliable, optimized connectivity for the next-generation of IoT network. The TLD2 series tracker combines the high reliability and low latency support of LTE Cat-M1 ( eMTC) with the extended coverage and delay tolerance of Cat NB-1 (NB-IoT).
The inclusion of both technologies as well as E-GPRS in TLD2 series tracker allows customers to deploy products and services based on single SKU to function in a diverse set of operator deployments worldwide, and thus helping to maximize the IoT products global reach and scalability.
-LTE Cat-M1(eMTC) + LTE Cat-NB1(NB-IoT) + E-GPRS connectivity
-High gain GNSS
-OBDII data, VIN, DTC (diagnostics trouble code) and odometer reading (only in -D model)
-ECO driving for aggressive driver behaviour detection
-ELD compatible
-Accident detection and replay
-2 IP support (backup/parallel mode)
-Jammer detection
-Offline tracking
-Support TCP/UDP/MQTT
-FOTA (Firmware Over the Air)
Topfly Temperature sensor
In cold chain business, people have been looking for an efficient way to manage the environment their stock stored in. Especially for raw meat, seafood, fruit and medicine, they are required to be kept in a more accurate and constant temperature.
Temperature and humidity sensor TSTH1-B is designed to serve the needs of monitoring the environment in refrigerated trucks. It reports the precise temperature and humidity to the GPS trackers, so that the real time data can be seen on APP and web. This product stops fresh stocks being wasted due to unknowingly shut down of the refrigerator. It is one of the best ways to minimise losses in cold chain business. Furthermore, imagine if the distributors show their clients how their stock has been kept along the way, it is another proof of freshness.
Why is it important? When temperature changes and deviates from its pre-set due to mismanagement or machine breakdown, fresh stocks are put at risk of going bad. Big batches of high value products are wasted every year causing not only losses on the owner, but on our international economy.
How does TSTH1-B work? There are 2 ways of using this sensor. 1. It can connect and report straight to cell phone via BLE. The temperature and humidity figures will show on APP. 2. It can connect and report to a TOPFLYtech GPS tracker with BLE. The trackers then send the data to your server via network.
Where should we use TSTH1-B on? Refrigerated trucks, warehouses, supermarkets, storerooms, greenhouses, laboratories, you name it. Anywhere that requires a strict control of temperature or humidity can make great value out of TSTH1-B.
To know more about this exceptional product, please leave a message on the contact page. Looking forward to hearing from you!
Xirgo XT6300 Series for Passenger & Commercial/ Heavy Duty Fleets
The Xirgo XT6300 Series are vehicle tracking solutions with optional OBDII and JBUS protocols to support a wide range of vehicles including passenger, light to heavy-duty trucks, and commercial equipment. Device-contained geofences provide fleet managers with greater control and monitoring with instant notifications. The XT6300 Series are full-featured devices based on a platform that allows rapid customization by market and application requirements. The modular design allows for Garmin FMI, Bluetooth connectivity, and 1-wire Bus.
The optional Bluetooth allows bi-directional communication with other BT-enabled devices. The two 1-Wire Bus interfaces allow for Driver ID or Serial Temperature Sensing. Designed with embedded cellular, GPS, and optional Bluetooth® antennas, the Xirgo XT6300 Series reduces the need for additional external accessories. Highly configurable firmware allows full control of device reporting behavior. Customizable data packets provide only the data required to support unique and evolving business needs.
Available Configurations
» XT6372: Verizon LTE Cat.1 with optional OBD/JBUS, single wire CAN, Bluetooth, backup battery, buzzer
» XT6376: AT&T LTE Cat.1 & 3G fallback with optional OBD/JBUS, single wire CAN, Bluetooth, backup battery, buzzer
Key Features
» Embedded cellular and GPS antennas
» Integrated high-precision GPS engine
» Supports TCP, UDP, FTP
» Extensive Inputs and Outputs
Please contact us for more information about our products
Xirgo XT2400 Series for OBD-ll “Plug & Play” Passenger/ Light Duty Vehicles
The Xirgo XT2400 Series is the most versatile diagnostic & monitoring device available for communicating vital vehicle information and driver behavior. With an integrated GPS engine, accelerometer, cellular and GPS antennas, and integrated OBD-ll interface, this product is the ultimate solution for fleet managers in need of monitoring location, speed, and other codes available on the OBD port of vehicles. In addition, to supporting open OBD-ll standard parameters, the Xirgo XT2400 Series has the functionality to report OEM proprietary parameters.
This gives our customers unrivaled versatility for providing additional information from the vehicle BUS such as true odometer, fuel level, engine oil life remaining, tire pressure sensor, and seat belt status. With an integrated J1962 connector, a compact design powered through the OBD port, and low power consumption, the device can be installed in a matter of seconds which substantially reduces installation cost.
Available Configurations
» XT2469: AT&T Cat. M1 available with optional backup battery and buzzer
» Verizon Cat. M1
Key Features
» Embedded cellular and GPS antennas
» Integrated high-precision GPS engine
» Integrated OBD-ll interface enables monitoring of location, speed, VIN, and ignition status among other parameters
» Diagnostic fault codes (DFCs / DTCs)
Please contact us for more information about our products
Teltonika FMM001
Teltonika FMM001 represents next step in communication technology – this is the first Plug and Track LTE OBD device with GNSS and Bluetooth connectivity. Possibility to read OBD II parameters, effortless installation and detailed accelerometer data provides a compelling solution. This is perfect tracker for a wide range of applications – fleet management of light commercial vehicles, car rental & leasing, driver log-book, insurance telematics (UBI) and so on. Device supports various Bluetooth Low Energy sensors, beacons, firmware and configuration update via Bluetooth.
XT4900 Energy Harvesting Series for Long Term Remote Deployments and Logistics Solutions
The XT4900 Series is a solar harvesting LTE platform supporting long term, remote deployments without the need to replace the battery. The device utilizes a high-efficiency solar panel to charge and maximize the operating life of the internal Lithium-Ion battery. Customers who require frequent data for location, health, and monitoring of their remote assets can be assured that XT4900 Series will provide more frequent data for longer periods compared with other asset tracking devices in the market today. XT4900 Series supports highly configurable reporting frequency and event triggers, along with 16Mb of flash memory that supports up to 10,000 11-point geofences. The internal 10.4Ah battery is best in class, exceeding industry standards for temperature extremes and is capable of more than 3000 life cycles. Safe charging and discharging termination over temperature are also managed by the device. Designed to withstand demanding environments, the XT4900 Series meets IP67 rating making it ideal for trailer, container, overseas maritime, and other high-value asset tracking.
Xirgo XT4500 Series for Low Powered & Remote Assets
The Xirgo XT4500 Series is a self-contained UMTS/HSPA modem with an integrated GPS engine, cellular and PCS antennas, accelerometer, motion detector, and 960 mAh internal rechargeable battery. With a powerful 32-bit microprocessor and unique power management algorithm, this device platform consumes less than 120 μA in sleep mode, yet is capable of periodic reporting of status and location of remote assets. The Xirgo XT4500 Series has been designed with the latest GPS technology, allowing tracking under extreme conditions where most other competing products fail.
Available Configurations
» XT4500: AT&T LTE-M and LTE Cat1
Key Features
» Embedded cellular and GPS antennas
» Integrated high-precision GPS engine
» Rechargeable battery options
» Extensive Inputs and Outputs
» Accelerometer and Motion Detector
» Optional waterproof case for outdoor use
Please contact us for more information about our products
